Video that shows you how, using the KIS Principal for a Waste Oil Stove

The KIS Waste Oil Stove incorporates a venture system to spray waste oil into the fire chamber. It burns very hot, clean, and is easy to control by adjusting air pressure up or down. It will burn from 3/4 to 1-1/2 gal per hour.

I am using it to heat a 2400 sq. ft. shop, 22 ft. at the peak and insulated. It also has a 250 sq. ft. insulated extension added on to the shop. At the same time, I am also heating a 1000 sq. ft. house with heated water that is circulated around the exhaust. It is requiring approximately 1 gallon per hour of waste oil. This equates to approximately 144,000 Btu.

After the stove appeared in Farm Show Magazine, there was considerable interest and I now have a video showing how to build one for yourself. From the filtering of the oil to building the stove and nozzle, and how to maintain and operate the stove. The video is approximately 1-3/4 hours long. It will not be up for any awards in Hollywood, but it does cover all aspects of how to build the KIS Waste Oil Stove.

Our video is $49.95 and may be purchased by clicking the link below for our order form.